February 9, 2009

D&D's Ghost Pipe Adds Duals Look to 2009 Harley-Davidson FLH Bagger Motorcycle

D&D's Ghost Pipe Delivers The Look

What: New ghost pipe for 2009 FLH Baggers
Why: Provides a dual pipe look with a Boss Fat Cat pipe
Installation: 30 minutes and a couple of hand tool

The 2 into 1 Boss Fat Cat delivers a 15% increase in Horsepower and a 15% increase in Torque. Combining the D&D Ghost Pipe with a Boss Fat Cat provides the best combination available - exceptional performance and an outstanding duals look.

Looks Good & Sounds Even Better

GHOST PIPE INSTALLATION

2009 HD Touring “Boss” Ghost Pipe

To be used with the “Boss” Fat Cat 2 into 1:

Midnight Black: #549-31
Show Chrome: #549-32

Take 30 minutes and convert your 2009 Harley-Davidson into a dual pipe touring motorbike.

1. Remove left saddlebag.
2. Remove stock crossover mount, bolted to the lower rear oil pan. Retain these bolts as they will be used later.
3. Open box and inspect pipe. No warranty for cosmetics after installation.
4. Loosely mount rear of ghost pipe to saddlebag support using supplied hardware and spacers.
5. Attach ghost pipe front mount to oil pan using existing hardware. Be sure to apply blue loctite to threads.
6. Check alignment.
7. Torque bolts to oil pan using factory specifications.
8. Tighten rear of muffler to the saddlebag support.
9. Clean system with glass cleaner to remove any oil and fingerprints.
10. Install saddlebag.

February 9, 2009 7:34 AM | send page